NUTRICHEF PKCWC12 - User Manual

11 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

PKCWC

Table of Contents

Questions and Answers

E
elizabethsharpAug 17, 2025
What to do if my NUTRICHEF Kitchen Appliances wine cooler is not cold enough?
- E
  ebarnesAug 17, 2025
  If your NUTRICHEF wine cooler isn't cold enough, check the temperature control settings, keeping in mind the ideal ambient temperature for compressor cooling is 5C-32C (41F-90F). Avoid opening the door too frequently or leaving it open. Ensure the door seals properly and that the area near the heat sink fan on the back is clear (within 10cm). If you've just loaded it with many items, allow 24 hours for it to stabilize.
N
Nicole FryeAug 20, 2025
How to fix the LED display on my NUTRICHEF Kitchen Appliances wine cooler?
- J
  Jessica ThompsonAug 20, 2025
  If the LED display on your NUTRICHEF wine cooler isn't working, first ensure the plug is properly connected to the socket. Also, the digital control panel will lock automatically after 10 seconds of no use, so press the unlock button to activate the wine cooler. The main control board may also have a problem.
B
barkerangelaAug 22, 2025
Why my NUTRICHEF Kitchen Appliances wine cooler will not operate?
- E
  Erika DiazAug 22, 2025
  Your NUTRICHEF wine cooler may not operate because the circuit breaker has tripped, or a fuse has blown.
K
Keith WellsAug 25, 2025
How to reduce noise from my NUTRICHEF Kitchen Appliances wine cooler?
- C
  Christopher KingAug 26, 2025
  Excessive noise from your NUTRICHEF wine cooler could be due to the unit not being level. Also, check the fan for dust accumulation, which can increase noise over time. Use a hair dryer on a strong setting to blow away any dust on the fan.
M
Mr. Nathan Estes DDSAug 27, 2025
How to stop my NUTRICHEF Kitchen Appliances wine cooler from vibrating?
- K
  Kayla NewmanAug 27, 2025
  To stop your NUTRICHEF wine cooler from vibrating, ensure the unit is level. Adjust the foot if necessary.
C
Christian AndersonAug 29, 2025
What to do if my NUTRICHEF Kitchen Appliances wine cooler will not close properly?
- E
  Erin WilsonAug 30, 2025
  Your NUTRICHEF wine cooler may not close properly if the unit isn't level, the doors were reversed and not properly installed, or the seal is weak.
R
Robert PhamSep 1, 2025
Why is there frost or ice inside my NUTRICHEF Kitchen Appliances wine cooler?
- M
  Michelle MoralesSep 2, 2025
  Frost or ice may develop inside your NUTRICHEF wine cooler if the ambient temperature is too low. The wine cooler may also need to be restarted.
J
James SanchezSep 3, 2025
What causes an LED display error on my NUTRICHEF Kitchen Appliances?
- J
  Jason HoSep 4, 2025
  An LED display error on your NUTRICHEF wine cooler indicates a PCB problem.
W
wolfcrystalSep 6, 2025
Why is my NUTRICHEF Kitchen Appliances wine cooler not cold enough?
- M
  mmoralesSep 6, 2025
  If your NUTRICHEF wine cooler isn't cold enough, several factors could be at play. The external environment might be too hot, so check the temperature control settings. The door may be opened too frequently or not closed completely, or the door seal may not be sealing properly. Also, ensure the wine cooler has sufficient clearance for heat dissipation and isn't overloaded with too many items, as it needs time to cool down and stabilize. Waiting 24 hours before checking again is recommended.
K
Kevin RodriguezSep 9, 2025
What to do if the LED display does not work on my NUTRICHEF Kitchen Appliances wine cooler?
- O
  ortizjasonSep 9, 2025
  If the LED display on your NUTRICHEF Kitchen Appliances wine cooler isn't working, first, ensure the plug is securely connected to the socket and plugged in. The digital control panel locks automatically after 10 seconds of inactivity; press the unlock button to activate the wine cooler. Alternatively, there may be a problem with the main control board.

Summary

Important Safety Instructions

Parts Diagram

Installing the Stainless Steel Handle

Temperature Control

Control Panel

Details the functions and buttons on the cooler's control panel.

Setting the Temperature Control

Explains how to adjust and lock the temperature settings on the control panel.

Electric Diagram

Instruction

Power Connection

Details grounding, plug type, and avoiding extension cords for safe power connection.

Ventilation

Cleaning

Trouble Shooting

NUTRICHEF PKCWC12 Specifications

General

Capacity	12 Bottles
Cooling System	Thermoelectric
Lighting	LED
Temperature Range	41°F - 64°F
Control Type	Digital
Material	Stainless Steel

Related product manuals

Preview: NUTRICHEF PKCWC120

NUTRICHEF PKCWC120

NUTRICHEF PKCWC180

Preview: NUTRICHEF PKCWC

NUTRICHEF PKCWC

NUTRICHEF PKCWC240

NUTRICHEF PKCWCDS188

Preview: NUTRICHEF PKCWC Series

NUTRICHEF PKCWC Series

Preview: NUTRICHEF PKFD58

NUTRICHEF PKFD58

Preview: NUTRICHEF PKMFR14

NUTRICHEF PKMFR14

Preview: NUTRICHEF PKBRTP50

NUTRICHEF PKBRTP50

NUTRICHEF PKTEWC80

Preview: NUTRICHEF PKVS15BK

NUTRICHEF PKVS15BK

NUTRICHEF PKTEWC180