this for perishable foods like the meat. If left at room temperature for more than 2 hours it may spoil. You can use the
Preset function for all the modes.
1. Choose the mode with which you want to delay cooking, "Rice” for example
2. Press “RICE “ button, it will make a beep sound, “RICE” button indicator light will turn on, LED will show default
keep pressure time of 00:10.
3. Adjust the keep pressure time if desired by pressing “+” and “-” buttons to increase the time in 1 minute increments.
4. Press “PRESET” button, the LED will show the default delay time of 01:00 and blink. Press “+” and “-“button to
adjust the delay time. Use “+” button to increase the delay time in 1 hour increments, and Use “-” button to increase
delayed time in 10 minute increments. For example, if you want rice to cook after 4:10 hours you need to press “+”
button 3 times, and “-” button 1 time, and LED will show 04:10 and blink.
5. Press On/Off/Warm button to confirm the time delay setting. Only “:” will blink in the LED and the time will start
counting down from 04:10 to 00:00 (time based on earlier example).
6. After delayed time is finished, the cooker will start cooking rice.
Note: if you choose any mode and forget operate (such as press On/Off/Warm button), there will be a continuous
reminder beep sound which prompts you to go to the next operation.
If the cooker is keeping warm with high pressure, the “WARM” indicator light will blink until the pressure is at a safe
level. When the pressure is safe, the “WARM” indicator light will be on and NOT blink.
To Next Page
Loading...