EasyManuals Logo

Nutricia Flocare Infinity Short Manual

Nutricia Flocare Infinity
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
FLOCARE INFINITY PUMP
SHORT MANUAL
11
Continuous
feeding
START/STOPSTART/STOP
CLRCLR
ml/hml/h
DOSE=VOLDOSE=VOL
++
400ml/h
1ml/h
22
Pre-set
dose
START/STOPSTART/STOP
ml/hml/h
DOSE=VOLDOSE=VOL
++
400ml/h
1ml/h
++
4000ml/h
1ml/h
Operating instructions
Clearing pump
memory and priming
the feeding set
When switching the pump on or o,
press this key for 2 seconds.
This will clear the previous volume.
The rate and dose will remain unchanged.
Pressing this key for 2 seconds will
automatically fill the feeding set. Connect the
feeding set to the feeding tube and choose
appropriate feeding program
11
or
22
.
FILL SETFILL SET
INFOINFO
Preparing and setting up the pump
11
Open the pump
door by pressing
gently up on the
lower wall (A) and
rotating the door
upwards (B) at the
same time.
Position the looped
section of the
silicone tubing
around the rotor.
22
Stretch slightly
to seat the
cassette into
the pump.
33
Close the pump door
- you should hear a
small click when it is
closed properly.
The
pump is now ready to
be switched on.
44
AT HOME

Other manuals for Nutricia Flocare Infinity

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nutricia Flocare Infinity and is the answer not in the manual?

Nutricia Flocare Infinity Specifications

General IconGeneral
Device TypeEnteral Feeding Pump
ManufacturerNutricia
ModelFlocare Infinity
Accuracy±5%
Flow Rate Increment1 ml/h
Keep Vein Open (KVO)1 ml/h
Power SupplyRechargeable battery or mains power
Bolus Dose1 to 400 ml
Bolus Interval1 to 24 hours
Occlusion Pressure SettingsLow, Medium, High
AlarmsOcclusion, Empty, Low Battery, Error
Storage Temperature-20 to 60°C
Battery Life24 hours
Operating Temperature5 to 40°C

Related product manuals