Nutricia Flocare Infinity Instruction Book

Flocare Pump Instruction Book & Guide 5
Press and hold the On/
O button until it beeps.
a) Wait for the word
‘VOLUME’ to appear
on the screen; the
number above it is
the previous amount
of feed delivered.
b) Press the CLR
button (short press).
The screen will change
to display ml/h.
The rate in
ml/hr is now
on screen. If
necessary press
the +/- button to
reach the desired rate.
a) Now press the Dose = Vol
button, ‘CONT’ will
appear on screen. If it
does not, press CLR
button for continuous
feeding. NOTE: It is safer
to set a dose by following
step b) below
b) To set a dose (total
amount of feed), press
+ button to reach the
desired amount.
STEP BY STEP PROGRAMMING YOUR PUMP
VOLUME
CONT

Nutricia Flocare Infinity Specifications

General

Device Type	Enteral Feeding Pump
Manufacturer	Nutricia
Model	Flocare Infinity
Accuracy	±5%
Flow Rate Increment	1 ml/h
Keep Vein Open (KVO)	1 ml/h
Power Supply	Rechargeable battery or mains power
Bolus Dose	1 to 400 ml
Bolus Interval	1 to 24 hours
Occlusion Pressure Settings	Low, Medium, High
Alarms	Occlusion, Empty, Low Battery, Error
Storage Temperature	-20 to 60°C
Battery Life	24 hours
Operating Temperature	5 to 40°C