Nutricia Flocare Infinity Instruction Book

Flocare Pump Instruction Book & Guide 6
PROGRAMMING YOUR PUMP STEP BY STEP (continued)
Press and hold FILL SET
until the pump beeps.
To stop fill cycle press
FILL SET again.
DO NOT OVERFILL.
Connect giving set to feeding
tube, open clamp if applicable.
Press the Start/Stop
button and the word
‘RUN’ will appear in the
top right of the screen.
If you wish to pause
the feed, press the
Start/Stop button.
To restart press the
Start/Stop button again.
The pump will alarm and stop running
when the full dose has been delivered.
When the feed has finished, turn o the
pump, disconnect the giving set from the
feeding tube and flush the feeding tube
with water as prescribed by your Dietitian.

Nutricia Flocare Infinity Specifications

General

Device Type	Enteral Feeding Pump
Manufacturer	Nutricia
Model	Flocare Infinity
Accuracy	±5%
Flow Rate Increment	1 ml/h
Keep Vein Open (KVO)	1 ml/h
Power Supply	Rechargeable battery or mains power
Bolus Dose	1 to 400 ml
Bolus Interval	1 to 24 hours
Occlusion Pressure Settings	Low, Medium, High
Alarms	Occlusion, Empty, Low Battery, Error
Storage Temperature	-20 to 60°C
Battery Life	24 hours
Operating Temperature	5 to 40°C