1110
How to KRÜSH it like a Pro!
MASTERING YOUR KRÜSH
E. CARING FOR YOUR KRÜSH
Everyone needs some love, especially your KRÜSH. And guess what, keeping your KRÜSH in
top-notch condition is a breeze!
A Word of Caution
Always unplug your KRÜSH from the power socket and allow it to cool down
to room temperature before any cleaning or maintenance.
No scrubbing or hard brushes, please. This will lead to scratches and
damage.
Avoid water damage: Do not immerse the main body/ base in water, or put in the
dishwasher or get water inside the motor casing. The main body has the electrical
components and water/ or any other liquids (cleaning liquid, soaps) will damage the unit
permanently.
Avoid leakage onto the main body/ base: Your KRÜSH is designed to be leakage proof, but
if you miss twisting the blade on the Go Jar™ tightly, the liquids may leak out and spill on
the inside gasket.
Nuuk_KRÜSH User Guide
Nuuk_KRÜSH User Guide
For when you need coarse blending
- As you press down the Go Jar™ with the blade assembly onto
the main body/ base, immediately release. Let the blade come
to a complete stop and tap again until you achieve the desired
consistency.
Pulse
For dense or thick consistency
- If the ratio of liquid is less and you have filled the ingredients
to the maximum level, the ingredients may not be able to move
around during the blending process.
- Remove the Go Jar™ with the blade assembly intact, hold it in
your hand and give it a good shake. You could also tap on the
sides of the Go Jar™. This ensures the ingredients move from
the top or sides of the Go Jar™ to the blade at the bottom. Be
careful not to apply excess force.
- Put it back on the main body/ base and Press to Play to
resume blending.
- Repeat if necessary.
Shake and Tap
Spillage Alert: The inside gasket in
the main body has a small hole to
handle any spillage.
However, be careful to avoid any
leakage or mess, to have a smooth
experience.
Main Body Exterior
Using a slightly damp soft cloth, wipe the exterior of the motor base.
For stubborn food stains or spills, use a mild cleaning solution and a soft cloth to spot clean.
Do not spray cleaning agents directly onto the motor base or use any scraping tools like
knives for removing food stains.
Ensure the motor base is completely dry before using the blender again. Use a dry
microfiber cloth. Easy peasy!
Health Made Easy - Scan the QR code on the main body to unlock nutritious
and delicious recipes and explore our EAT SLAY LOVE category for more
scrumptious inspiration!
Gasket
To Next Page
Loading...