1. SPEAKER SYNC SET UP PERIOD IS LIMITED TO 90 SECONDS
AFTER TURNING THE FIRST SPEAKER ON.
Whether you are syncing a small or large number of speakers you may
not be able to sync all your speakers within the 90 second time period.
If this happens, follow these steps to continue syncing:
(i) Press the sync button on the first speaker until sync light goes off
(ii) Follow steps 3 and 4 on Page 7 to continue syncing speakers
(iii) Press the sync button on any synced speakers that became unlinked
2. WHEN
SYNCED SPEAKERS ON,
.
When you sync speakers they stay synced - meaning when you
power synced speakers off they will automatically sync with each
other again when powered power all your
.
3. CHOOSING A LOCATION FOR THE TRANSMITTING SPEAKER.
off, it .
position the transmitting speaker in a
location where you can easily turn it on and off.
4. CHANGING A TRANSMITTING SPEAKER TO A RECEIVING
8
SYNC TIPS
Please note the below tips to enhance your multi-sync experience!
SPEAKER.
wish to change to a transmitting speaker:
Turn it on first and follow steps 2 - 4 on Page 7 for syncing speakers,
but continue to hold the sync button on the first speaker while you
press the sync button on the transmitting speaker.
If you cannot establish sync connection, please contact customer care
(SEE PAGE 12)
To Next Page
Loading...