02
OPERATING
INSTRUCTIONS
6
I. REVIEW THE FUNCTION PANEL AND PORTS
II. CHARGE YOUR SPEAKERS
NOTE: speakers must be fully charged before use
1. Release port cover and plug power adapter pin (B) into charging port
2. Plug power adapter into power outlet
3. Charge until indicator light turns solid red and remove charging cord
(full charge is reached after approximately 3 hours of charging)
INDICATOR LIGHTS
1 2
8
4 53
6 7
FUNCTION AND DISPLAY PANEL BUTTONS
1. POWER ON/OFF
2. BLUETOOTH Pair/Wake/Disconnect
3. LIGHT SHOW ON/OFF + BRIGHTNESS CONTROL
4. LIGHT SHOW + TIMER SELECTION
5. SYNC (requires additional speakers)
6. VOLUME UP
7. VOLUME DOWN
8. TIMER INTERVAL INDICATOR
AUX IN (A)
BA
CHARGING PORT (B)
RELEASE COVER TO ACCESS PORTS
NOTE:
TO PREVENT WATER
ENTRY ALWAYS KEEP
COVER TIGHTLY CLOSED
To Next Page
Loading...