Need help?Do you have a question about the NUVIS TVI-D1108 and is the answer not in the manual?
General| Video Inputs | 8 channels |
|---|---|
| Compression Format | H.264 |
| Operating System | Embedded Linux |
| Recording Resolution | 1080p |
| Storage Capacity | Up to 6TB HDD |
| Network Connectivity | Ethernet |
| Power Supply | 12V DC |
Guides users through initial setup steps like language, date, time, and network settings.
Explains the process of adding and configuring IP cameras to the DVR system.
Details how to set up PTZ parameters, including RS-485 settings for camera control.
Guides on customizing and calling PTZ presets, patrols, and patterns for camera movement.
Covers setting recording parameters like resolution, bitrate, and stream type for main and sub-streams.
Details how to set up recording schedules for different cameras and days.
Explains how to enable motion detection, set areas, sensitivity, and trigger actions.
Describes how to configure recording based on external alarm inputs.
Details methods for playing back recorded video files, including by channel and instant playback.
Guides on how to play back videos recorded within a specific time duration.
Explains how to search and play back recordings based on specific event types like motion or alarm.
Explains backing up record files using USB devices, normal video search, and eSATA HDDs.
Details backing up event-related recording files using USB devices via event search.
Guides on configuring motion detection parameters, areas, sensitivity, and arming schedules.
Explains how to set up handling methods for external sensor alarms, including schedules.
Details how to detect video loss and configure alarm response actions and schedules.
Covers triggering alarms for video tampering, setting sensitivity, schedules, and responses.
Covers basic network settings like IP configuration, working modes, and MTU.
Details advanced network configurations including PPPoE, DDNS, NTP, SNMP, NAT, and HTTPS.
Guides on initializing new hard disk drives before they can be used with the DVR.
Covers adding and managing network HDDs like NAS or IP SAN disks.
Details configuring and managing external eSATA devices for record or export.
Explains how to manage HDDs in groups for organized storage of recorded files.
Explains how to configure privacy mask zones to mask specific areas of the camera view.
Provides instructions for upgrading the DVR system firmware via local backup or FTP.
Offers solutions to common problems encountered with the DVR device and its functions.
To Next Page
