Need help?Do you have a question about the NUVIS TVI-D1416 and is the answer not in the manual?
Options for connecting, configuring, and managing hard disk drives.
Various recording modes, schedules, and playback functionalities.
Step-by-step procedures for powering the DVR on and off safely.
A guided walkthrough for initial system setup and configuration.
Instructions for adding and integrating IP cameras into the DVR system.
Detailed guide to performing various operations within the live view interface.
Setup of parameters for PTZ cameras, including communication and protocol settings.
Configuration of camera presets, patrol paths, and movement patterns for PTZ control.
Setting video and audio encoding parameters for optimal recording quality and storage.
Establishing a schedule for automatic recording based on time and day.
Setting up motion detection events and configuring recording upon detection.
Setting up recording triggered by external alarm inputs and events.
Enabling redundant recording to ensure data safety and drive reliability.
Organizing and assigning HDDs into groups for structured recording storage.
Methods for searching, selecting, and playing back recorded video archives.
Procedures for backing up recorded video files to external storage devices.
Configuration of motion detection sensitivity, areas, and response actions.
Specifying actions to be performed when an alarm event is triggered.
Basic network configuration including IP addressing, subnet mask, and gateway.
Advanced network configurations such as PPPoE, DDNS, NTP, SNMP, and UPnP.
Steps for initializing new hard disk drives before they can be used by the DVR.
Procedures for updating the DVR's firmware using local backup or FTP.
Guidance on diagnosing and resolving common operational problems and errors.
To Next Page
General