Need help?Do you have a question about the NUVIS TVI-D1104 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Hard Drive Capacity | Up to 6TB |
| Compression | H.264 |
| Operating System | Embedded Linux |
| Video Input | BNC |
| Video Output | BNC, VGA, HDMI |
| Recording Resolution | 720p |
| Hard Drive Support | 1 SATA |
| Network Interface | RJ-45 |
| Power Supply | 12V DC |
| Recording Mode | Continuous, Motion Detection |
| Remote Viewing | Yes |
| Mobile Support | Android |
Covers connectivity, dual-stream, channel configuration, and watermark technology for enhanced operation.
Details simultaneous video outputs, live view modes, and alarm functions like motion detection.
Includes support for various disk types, SMART, and HDD sleeping for storage optimization.
Outlines scheduling, recording modes, types, and playback functionalities for efficient data management.
Outlines the steps for powering on the DVR, including power supply checks and indicator status.
Describes standard and front panel procedures for safely powering off the DVR to preserve its lifespan.
Guides users through the initial DVR setup process, including language selection and wizard navigation.
Covers setting the administrator password and configuring the system's date and time settings.
Details configuring general and advanced network settings, including IP addressing and connection modes.
Covers HDD initialization and setting up basic recording parameters as part of the initial configuration.
Explains the process of adding IP cameras to the system via the live view right-click menu.
Provides an alternative method for adding IP cameras through the main menu and selecting multiple channels.
Guides on configuring RS-485 parameters and PTZ camera settings before control operations.
Discusses selecting PTZ protocols like PELCO-C and their parameter limitations for camera control.
Explains how to set and save specific PTZ camera positions for quick recall and event response.
Guides on recalling saved PTZ presets to automatically reposition the camera for viewing specific scenes.
Covers checking HDD status, storage modes (Quota, Group), and initializing HDDs before configuration.
Details configuring stream type, resolution, quality, pre/post-record time, and redundant recording options.
Explains setting sub-stream encoding parameters and copying configurations to other cameras.
Guides on establishing daily recording schedules for cameras, including time periods and all-day options.
Details editing schedules for specific days, copying settings, and drawing schedules on a timeline.
Covers selecting channels for motion triggers and setting arming schedules for motion alarms.
Details configuring alarm input parameters, type, and selecting channels for alarm-triggered recording.
Covers selecting channels for alarm triggers, saving settings, and configuring schedules for alarm recording.
Explains enabling redundant recording by setting HDD property to Redundant for enhanced data safety.
Details checking the Redundant Record option in encoding parameters to save data on multiple HDDs simultaneously.
Explains how to protect recorded files from overwriting by locking them within the export interface.
Details setting the HDD property to Read-only to prevent accidental modification of recorded files.
Guides on enabling motion detection, defining detection areas, and adjusting sensitivity levels for event triggers.
Covers selecting channels for motion triggers and setting arming schedules for motion alarms.
Details setting up handling methods for external sensor alarms, including input parameters and response actions.
Explains setting arming schedules, linkage actions, and PTZ linkage for sensor alarms.
Guides on enabling video loss detection, setting handling methods, and configuring arming schedules for alerts.
Explains selecting linkage actions and copying settings for video loss detection to other channels.
Details enabling video tampering detection, setting sensitivity, and configuring arming schedules for tampering alerts.
Explains selecting linkage actions and copying settings for video tampering detection.
Guides on enabling and setting thresholds for video quality diagnostics like blurred image, brightness, and color cast.
Details setting responses for exceptions like HDD Full, Network Disconnected, and IP Confliction.
Explains displaying event hints and setting alarm linkage actions for various system exceptions.
Describes actions like Full Screen Monitoring, Audible Warning, Notify Surveillance Center, Send Email, and Trigger Alarm Output.
Guides on setting up arming schedules for alarm outputs and saving the configuration.
Covers basic network settings like IP address, subnet mask, gateway, and selecting working modes.
Details configuring email settings for event notifications, including server details, recipients, and test functionality.
Guides on initializing newly installed HDDs, including confirmation steps and status changes.
Details adding NAS or IP SAN disks as network HDDs, including search and configuration steps.
Explains adding NAS/IP SAN disks and initializing them if they are detected as uninitialized.
Details managing multiple HDDs in groups, setting storage mode to Group, and rebooting to apply changes.
Provides steps to fix problems with no video output on the monitor after device startup.
Addresses causes and solutions for a beep sound during device startup, related to HDD issues.
Discusses troubleshooting live view freezes caused by frame rate issues or incompatible streams.
Provides solutions for playback image freezing or stuttering, related to frame rate or hardware limitations.
Offers steps to resolve 'No record file found' errors by checking system time, search conditions, and HDD status.
To Next Page
