NuWave OXYPURE 47003 - OxyPure Operation Modes; Power On;Off and Auto Mode; Ultimate Clean and Sleep Mode

10 | OxyPure Smart
OPERATING THE OXYPURE
AUTO
SLEEP MODE
Filter Functions
Air purifiers operate more efficiently when
all windows and doors are closed. The
OxyPure can purify the air in extra-large
rooms (up to 2,671sq.ft.).
Stainless Steel Pre-Filter
Washable and reusable for up to 20
years.
Captures and collects large particles and
allergens including pet hair, dander, and
pollen.
Bio-Guard
™
Filter:
Washable and reusable for up to 20
years.
8,000V, positive and negative charges
capture particles as small as 0.1
microns, as well as smoke, pollen, and
allergens.
Ozone Emission Removal Filter
Reusable for up to 20 years. Not
washable.
Eliminates ozone emissions and other
harmful airborne chemicals.
HEPA/Carbon Filter
Lifespan, 6 months to 1 year. Not
Washable.
Captures and traps pollen, allergens,
industrial emissions, VOCs including
formaldehydes, household fumes, odors
and nitrogen dioxides from gas stoves and
car exhausts.
Power ON/OFF
1. Plug your OxyPure into an outlet.
POWER will be lit in red and OxyPure
will be in standby mode.
2. Press POWER. The OxyPure will turn
on and POWER will be lit green.
• Bars next to AIR and ODOR will
illuminate, measuring current air
quality.
• The fan will start.
3. Press POWER again to turn the
OxyPure off.
• When you select a different mode
other than the default AUTO before
turning off, the OxyPure will run the
previously selected mode when it is
powered back on.
AUTO
When the AUTO function is used, your
OxyPure will adjust the fan speed
automatically (no time limit).
1. Press AUTO. The AUTO light will be lit.
ULTIMATE
CLEAN
ULTIMATE CLEAN
When in ULTIMATE CLEAN mode, the
OxyPure will automatically adjust to the
highest fan speed based on your air quality
(no time limit).
1. Press ULTIMATE CLEAN. ULTIMATE
CLEAN will be lit green.
2. Press ULTIMATE CLEAN again to
turn it off.
SLEEP MODE
When in Sleep Mode the LED lights will be
off but the fan will still be active. Adjust the
fan speed to your preference prior to going
into Sleep Mode.
1. Manually adjust FAN SPEED.
2. Press and hold FAN SPEED for 2
seconds to activate Sleep Mode.
• The OxyPure will run at the fan
speed that was previously selected.
3. To turn off Sleep Mode, press any
button.
Note: ULTIMATE CLEAN and TURBO will
work while the OxyPure is in Sleep Mode.