NuWave OxyPure Zero E500 - Page 2

Customer Service:
For Amazon Purchases: support@nuwavenow.com ● For All Other Purchases: help@nuwavenow.com
Connection (Optional)
Connect the OxyPure to your home Wi-Fi network and pair it with your
smart device:
1. Download the NuWave® Connect app via the Apple Store or
Google™ Play Store on your smartphone or device and open the
app.
2. Once you download the NuWave® Connect app, ensure your
phone is connected to your home Wi-Fi network on the 2.4GHz
frequency and that your phone’s Bluetooth is on.
3. Turn on the OxyPure and activate Wi-Fi Pairing Mode by pressing
and holding ULTIMATE CLEAN until the light next to the Wi-Fi
symbol begins to blink rapidly.
4. In the NuWave® Connect app, tap the + symbol, then tap Auto
Scan and select your device.
5. Enter your Wi-Fi network’s password and tap Confirm. If the
connection is successful, the app will display “Added Successfully”
on the screen.
If you’re unable to pair your OxyPure using Auto Scan, follow the
instructions for AP Mode or EZ Mode on page 8 of the owner’s
manual.
Wi-Fi LED Status
Solid Light
The OxyPure
®
is paired with the Wi-Fi and ready.
Rapid Blinking
Light
The OxyPure is in Pairing Mode.
Slow Blinking Light
The OxyPure is in Standby Mode.
No Light The OxyPure’s Wi-Fi is off.
If the OxyPure is in Standby Mode, Initiate Pairing Mode by pressing &
holding ULTIMATE CLEAN until the Wi-Fi light blinks rapidly.
Notes
To reset the OxyPure’s Wi-Fi, hold down ULTIMATE CLEAN for 2
seconds. Follow step 4.
• To connect to or change networks, depending on your cellular
service, you may need to remove the app and reinstall it to
complete the connection before continuing with the setup
process.
The OxyPure will only connect to a 2.4GHz network (standard
for most routers). If you need help activating 2.4GHz on your
network, contact your Internet Service Provider.
Filters
Bio-Guard
®
Filters (Lifespan up to 20 years)
• 8,000-volt electrostatic filter kills 99.99% of mold, bacteria, and
viruses.
• Captures 100% of particles and pollutants as small as 0.1µ in
120 minutes.
Stainless-Steel Prefilter (Lifespan up to 20 years)
• Made from rust-free 18/8 stainless-steel.
• The durable, washable, and reusable Prefilter captures and
collects large particles, pollutants, and allergens including pet
hair, dander, and pollen.
Before Use
1. Make sure the OxyPure
®
is unplugged. Open the panel on the back to
expose the lters.
2. Pull the lters from their slots.
3. Remove the plastic wrapping from the lters.
4. Fully reinsert the lters into the Oxypure and close the panel.
5. Remove the sticker from the control panel.
Wi-Fi