NuWave Precision Induction Wok - Control Panel Operation Details; Quick Start Cooking Guide; Temperature and Time Adjustment; Setting Up Multi-Stage Cooking

16
Owner’s Manual
CONTROL PANEL (CONTINUED)
Quick Start:
1. After you turn the unit on, press “start” on the dial. “375F” and “TEMP”
will be displayed and the countdown will begin.
• The Wok is defaulted to 375F for 20 minutes.
Temperature Function:
Simply turn the dial to decrease or increase temperature.
• Located on the left dial.
• Temperature range 100-575F in 5-degree increments.
Time Function:
Simply turn the dial to decrease or increase time.
• Located on the right dial.
• Time range is from 1 minute to 9 hours and 59 minutes (Time is in Hours
and Minutes).
Stage Function:
1. Press “stage”. “STAGE” will be ashing and “1”, “TIME”, and “00:00” will
be displayed.
2. Set time and adjust temperature, if needed.
3. Press “stage” again. “STAGE” will be ashing and “2”, and “TIME”, and
“00:00” will be displayed.
4. Set time and adjust temperature, if needed.
5. Repeat steps, if necessary.
• You can create up to 10 stages. Stage 10 will display as “0”.
6. Press “start”.
Preheat Function:
1. Press “preheat”. “PREHEAT” and “375F” will be displayed.
2. Adjust time and adjust temperature, if needed.
• Preheat program has a default of 375F for 20 minutes.
3. Press “start”. Selected temperature and “F” will be ashing.
4. Once the temperature you selected has been reached, “selected
temperature” and “ready” will be displayed indicating the Wok will hold
that temperature for 5 minutes or until you press “start”.
5. Once you press “start”, the countdown you selected will begin with the
programmed temperature.
• If you press “pause” when the unit is preheating, “5” will be ashing,
indicating the Wok will hold the program for 5 minutes or until you
press “start”.