Why does my NuWave Precision Induction Wok Kitchen Utensil show error E7?
The E7 error on your NuWave Kitchen Utensil indicates overheating or obstructed air ventilation. If the internal temperature exceeds 230°F, the unit will beep and stop operating. To resolve this, press the “pause/clear” button twice and wait for the unit to cool down.
What to do if my NuWave Kitchen Utensil displays error E1?
The E1 error on your NuWave Kitchen Utensil typically means the induction coils are not in direct contact with the wok, or the wok is not induction-ready. To fix this, ensure the unit rests on a flat surface for consistent contact with the wok. It is also recommended to only use the wok supplied with the Precision Induction Base.
Why does my NuWave Precision Induction Wok Kitchen Utensil display error E3?
Error E3 on your NuWave Kitchen Utensil indicates that the unit’s voltage is too low. The minimum voltage required for operation is 85 volts.
Why does my NuWave Precision Induction Wok Kitchen Utensil display error E4?
Error E4 on your NuWave Kitchen Utensil means the unit’s voltage is too high. The maximum voltage should be 144 volts.
What does error 'FULL' mean on my NuWave Kitchen Utensil?
The 'FULL' error on your NuWave Kitchen Utensil indicates that no additional stages can be inputted.
Lists specific dangers and precautions related to electrocution.
Advises consultation for individuals with pacemakers regarding electromagnetic fields.
Covers general warnings about heat, child supervision, proper placement, and usage.
Details precautions for aerosol use, children, placement, and household use.
Advises on cleaning precautions to avoid hazards.
Provides guidance on cord length, extension cord usage, and plug compatibility.
Covers essential setup and environmental considerations for operating the wok base.
Identifies and explains the functions of buttons and displays on the control panel.
Guides users through the basic steps to start cooking quickly.
Explains the common E1 error message and its causes.
Lists other error codes (E2-E9, FULL) and their corresponding solutions.
Further clarifies issues related to the wok not being detected by the base.
Explains how to resume cooking after an E1 error is resolved.
General| Type | Induction Wok |
|---|---|
| Brand | NuWave |
| Model Name | Precision Induction Wok |
| Control Type | Digital |
| Power Source | Electric |
| Power | 1500W |
| Temperature Range | 100°F to 575°F (38°C to 302°C) |
| Size/Diameter | 14 inches |
| Material | Stainless Steel |
| Timer | Yes |
| Cooktop Compatibility | Induction |
| Handle Material | Heat-resistant material (likely Bakelite or similar) |
| Safety Features | Automatic shut-off, Overheat protection |
| Dishwasher Safe | No |
| Included Accessories | Glass lid |
| Pre-Set Functions | 6 (Stir-Fry, Steam, Boil, Simmer, Deep Fry, Sear) |
| Temperature Control | Precision digital temperature control |
| Power Levels | 10 power levels |
To Next Page
