NuWave Precision Induction Wok - Continued Troubleshooting Guide; Wok Detection and E1 Error Resolution; Resuming Cooking After Errors; Automatic Cooking Stop Conditions

18
Owner’s Manual
TROUBLESHOOTING GUIDE (CONTINUED)
When the Wok is off of the NuWave Precision Induction Wok
Initial Single beep
“F” or “C”
or “Sear” or
“:” Flashing
After returning the
Wok to the surface of
the NuWave Precision
Induction Wok, it
will automatically
resume cooking.
<10 seconds None
“F” or “C”
or “Sear” or
“:” Flashing
11-70 seconds Yes E1
Resume cooking by
pressing “start”.
After 70 seconds None 0 Cooking stops.