Need help?Do you have a question about the nux NBP-5 and is the answer not in the manual?
General| Type | Bass Preamp |
|---|---|
| Inputs | 1/4" Instrument Input |
| Outputs | 1/4" Output, XLR DI Output |
| Power Source | 9V DC |
| Battery | 9V |
Introduction to the collaboration with Melvin Lee Davis for the MLD Bass Preamp & DI.
Details on using the pedal as an audio interface for recording via USB.
Information on downloading and using the software for pedal control and IR loading.
List of primary functionalities including EQ, drive, noise gate, and IR loader.
Adjusts the output volume level of the signal.
Mixes overdrive effect with the dry signal between 50% and 100%.
Adjusts the selected middle frequency level.
Adjusts the low frequency level.
Adjusts the overdrive level when the effect is active.
Selects middle frequency range from 160Hz to 1kHz.
Adjusts the high frequency level.
Activates/deactivates cabinet simulation for DI and headphone outputs.
Activates/deactivates cabinet simulation for the main output.
Engages or disengages the preamp section.
Engages/disengages overdrive and controls noise gate settings.
Helps eliminate ground loop noise for hum reduction.
Selects PRE or POST signal routing for the DI output.
Provides the processed sound from the preamp/drive section.
Connects to computer for firmware updates, software control, and audio streaming.
Standard input for bass guitar or other effects pedals.
Outputs a dry signal, useful for connecting to an amplifier's front end.
DC 9V power input with negative tip configuration.
Direct connection to mixers or PA systems; signal routing is configurable.
Connects external audio players for practice with backing tracks.
For silent practicing or monitoring.
Diagram showing bass connected to amplifier and mixer via the NBP-5.
Diagram illustrating connection of a player to the headphone output for practice.
Details sampling frequency, converters, response range, noise, and dynamic range.
Lists EQ frequency points, power supply requirements, and current draw.
Provides physical dimensions and weight of the NBP-5 pedal.
Essential safety instructions regarding fire, electric shock, and proper usage.
Overview of the NBP-5 Bass Preamp & DI, highlighting collaboration and features.
Information on using the pedal as an audio interface for computer connectivity.
Details on the software for IR file import and advanced parameter adjustments.
Summary of key features like EQ, drive, noise gate, and I/O options.
Details sampling frequency, A/D converter, signal processing, dynamic range, and input/output levels.
Specifies the EQ bands, frequency ranges, and boost/cut levels for MLD and AGL.
Lists power requirements, dimensions, and the unit's weight.
Provides the hotline number for support and inquiries.
Outlines conditions for product returns and exchanges within the first month.
Details free warranty repair service for one year and paid service thereafter.
Indicates the product has passed inspection and meets specified standards.
To Next Page
