Why is the System Status LED Amber on my Nvidia 920-9N42F-00RI-7C0?
If the System Status LED on your Nvidia Switch is Amber, it indicates a critical system fault such as a CPU error, bad firmware, or an over-temperature condition. You should check the environmental conditions, such as the room temperature, to ensure they are within the recommended operating range.
What to do if the Fan Status LED is Amber on Nvidia 920-9N42F-00RI-7C0 Switch?
If the Fan Status LED on your Nvidia Switch is Amber, this indicates a possible fan issue. First, check that the fan is fully inserted and that nothing is blocking the airflow. If the problem persists, you may need to replace the fan FRU.
Details system's maximum throughput and interface speeds.
Covers mechanical, power, and thermal precautions for installation.
Important safety precautions to follow before installation.
Explains airflow patterns and considerations for system cooling.
Describes different mounting methods and rail kit options.
Instructions for bringing the system online after initial setup.
Information on replacing Field Replaceable Units (FRUs).
Instructions for upgrading the Cumulus Linux operating system.
Instructions for upgrading the SONiC operating system.
Information regarding switch firmware updating procedures.
Troubleshooting issues indicated by system LEDs.
Resolving boot failures when using Cumulus Linux.
General| Model | 920-9N42F-00RI-7C0 |
|---|---|
| Category | Switch |
| Manufacturer | Nvidia |
| Form Factor | Rack-Mountable |
| Product Type | Switch |
To Next Page
