Why is the System Status LED Amber on my Nvidia Switch?
If the System Status LED on your Nvidia Switch is Amber, it indicates a critical system fault such as a CPU error, bad firmware, or an over-temperature condition. You should check the environmental conditions, such as the room temperature, to ensure they are within the recommended operating range.
What to do if the Fan Status LED is Amber on Nvidia Spectrum-4 SN5000 2U?
If the Fan Status LED on your Nvidia Switch is Amber, this indicates a possible fan issue. First, check that the fan is fully inserted and that nothing is blocking the airflow. If the problem persists, you may need to replace the fan FRU.
General| Form Factor | 2U |
|---|---|
| Switch Type | Ethernet Switch |
| Switching Capacity | 51.2 Tbps |
| Throughput | 25.6 Tbps |
| Latency | 300ns |
| Power Supply | Dual redundant, hot-swappable |
| Model | Nvidia Spectrum-4 SN5000 2U |
| Ports | 64 ports |
| Port Speed | 400GbE |
| Cooling | Front-to-back airflow |
| Network Protocols | Ethernet |
| Protocols | BGP, OSPF |
| Management | CLI, Web UI, REST API, SNMP |
Lists NVIDIA SKU and product descriptions for SN5400 models.
Lists NVIDIA SKU and product descriptions for SN5600 models.
Details management interfaces, power supply units (PSUs), and fan modules for system models.
Covers mechanical, power, and thermal precautions for rack-mounted equipment installation.
Important safety precautions to review before system installation.
Describes the airflow patterns supported by NVIDIA systems for proper ventilation.
Details the items included in the system package to check after unpacking.
Explains available rail-kits for system mounting and provides part numbers.
Instructions for initial configuration of Cumulus Linux systems.
Instructions for initial configuration of SONIC systems via NVIDIA Enterprise Support Portal.
Refers to the section for a list of Field Replaceable Units (FRUs).
Describes the redundant power supply units and their operation.
Details data interfaces, QSFP-DD/OSFP modules, transceivers, and adapters.
Specifies the maximum power capabilities for optical transceivers.
Explains the system's LEDs for hardware event notification and troubleshooting.
General information on upgrading Cumulus Linux and SONiC software.
Instructions for upgrading Cumulus Linux software.
Instructions for upgrading SONiC software via NVIDIA Enterprise Support Portal.
Information regarding switch firmware updates.
Detailed specifications for the SN5400 model, covering mechanical, environmental, and power aspects.
Detailed specifications for the SN5600 model, covering mechanical, environmental, and power aspects.
Lists part numbers for ordering replacement accessories and components.
Defines warning, critical, and emergency thermal thresholds for ASIC operation.
To Next Page
