Why is the System Status LED Amber on my Nvidia Switch?
If the System Status LED on your Nvidia Switch is Amber, it indicates a critical system fault such as a CPU error, bad firmware, or an over-temperature condition. You should check the environmental conditions, such as the room temperature, to ensure they are within the recommended operating range.
What to do if the Fan Status LED is Amber on Nvidia SN5600 Switch?
If the Fan Status LED on your Nvidia Switch is Amber, this indicates a possible fan issue. First, check that the fan is fully inserted and that nothing is blocking the airflow. If the problem persists, you may need to replace the fan FRU.
General| Switching Capacity | 12.8 Tbps |
|---|---|
| Forwarding Rate | 9.52 Bpps |
| Form Factor | 1U |
| Model | SN5600 |
| Vendor | NVIDIA |
| Management | NVIDIA Cumulus Linux, NVIDIA Onyx |
Lists specific part numbers for NVIDIA SN5400 switch models.
Lists specific part numbers for NVIDIA SN5600 switch models.
Details mechanical, power, and thermal precautions for rack mounting systems.
Details data interfaces using QSFP-DD/OSFP modules or transceivers.
Lists LED indicators, their symptoms, causes, and solutions for troubleshooting.
Details mechanical, environmental, regulatory, power, and performance specs for SN5400.
Details mechanical, environmental, regulatory, power, and performance specs for SN5600.
To Next Page
