1.
2.
3.
4.
5.
6.
7.
Unplug and remove all connectors.
Unplug all power cords.
Remove the ground wire.
Unscrew the center bolts from the side of the system with the bracket.
Slide the system from the rack.
Remove the rail slides from the rack.
Remove the caged nuts.
Disposal
According to the WEEE Directive 2002/96/EC, all waste electrical and electronicequipment (EEE)
should be collected separately and not disposed of with regularhousehold waste.Dispose of this
product and all of its parts in a responsible and environmentallyfriendly way.
Lithium Battery
The product's Real-time Clockincludes a Lithium coin battery (CR2032) that contains perchlorate.
When replacing the battery, use only a replacement battery that is recommended by the equipment
manufacturer.
Support the weight of the system when you remove the screws so that the system
does not fall.
The battery can explode if not properly used, replaced, or disposed of.
Dispose of the battery according to your local regulations. Do not attempt to recharge the
battery, disassemble, puncture, or otherwise damage it.