Nvidia ConnectX-6 Lx - Page 15

NVIDIA ConnectX-6 Lx Ethernet Adapter Cards for OCP Spec 3.0 User Manual 14
Call
out
Item Description
1
“ConnectX-6 Lx
IC”
NVIDIA ConnectX-6 Lx IC on the board.
2
“PCI Express
Interface"
PCIe Gen 4.0 through an x8 edge connector.
3
“Ethernet
SFP28/QSFP28
Interface”
Ethernet traffic is transmitted through the adapter's
SFP28/QSFP28 connectors. The networking connectors allow for
the use of modules, optical and passive cable interconnect
solutions.
4
“Networking
Ports LEDs
Interface”
There are two I/O LEDs, LED0 and LED1, per port to indicate
speed and link status.
“FRU EEPROM” FRU EEPROM capacity 4Kb
“SMBus
Interface”
Allows BMC connectivity using MCTP over SMBus or MCTP over
PCIe protocols.