7. [Optional] If you want to enable the default configuration for Rivermax, run.
8. [Optional] If you want to skip the check for unsupported devices, run/
Firmware Upgrade
If the machine has a standard NVIDIA® card with an older firmware version, the firmware
will be automatically updated as part of the NVIDIA® WinOF-2 package installation. For
information on how to upgrade firmware manually, please refer to MFT User Manual.
If the machine has a DDA (pass through) facility, firmware update is supported only in the
Host. Therefore, to update the firmware, the following must be performed:
1. Return the network adapters to the Host.
2. Update the firmware according to the steps in the MFT User Manual.
3. Attach the adapters back to VM with the DDA tools.
Linux Driver Installation
This section describes how to install and test the NVIDIA OFED for Linux package on a
single server with a NVIDIA ConnectX-6 Lx adapter card installed.
Please remove the following oem inf files from driver store:
<oem inf list>"
MLNX_WinOF2_<revision_version>_All_Arch.exe /v"MT_RIVERMAX=1 /l*vx C:\Users\<user>\log.txt
"
MLNX_WinOF2_<revision_version>_All_Arch.exe /v" SKIPUNSUPPORTEDDEVCHECK=1"
To Next Page
Loading...
