Nvidia ConnectX-6 Lx - Page 46

NVIDIA ConnectX-6 Lx Ethernet Adapter Cards for OCP Spec 3.0 User Manual 45
3. [Optional] Manually configure your setup to contain the logs option:
4. [Optional] if you wish to control whether to install ND provider or not (i.e.,
MT_NDPROPERTY default value is True).
5. [Optional] If you do not wish to upgrade your firmware version
(i.e.,MT_SKIPFWUPGRD default value is False).
6. [Optional] If you do not want to install the Rshim driver, run.
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_-Arch.exe /S /v/qn
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_-Arch.exe /S /v/qn /v”/l*vx [LogFile]"
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /vMT_NDPROPERTY=1
MLNX_WinOF2-[Driver/Version]_<revision_version>_All_Arch.exe /vMT_SKIPFWUPGRD=1
MLNX_WinOF2_<revision_version>_All_Arch.exe /v" MT_DISABLE_RSHIM_INSTALL=1"
Warning
The Rshim driver installanion will fail if a prior Rshim driver is
already installed. The following fail message will be displayed in
the log:
"ERROR!!! Installation failed due to following errors: MlxRshim
drivers installation disabled and MlxRshim drivers Installed,