Hardware Installation
Installation and initialization of ConnectX-6 Lx adapter cards for OCP Spec 3.0 require
attention to the mechanical attributes, power specification, and precautions for
electronic equipment.
Safety Warnings
Note that not all warnings are relevant to all models.
General Installation Instructions
Read all installation instructions before connecting the equipment to the power
source.
Jewelry Removal Warning
Before you install or remove equipment that is connected to power lines,
remove jewelry such as bracelets, necklaces, rings, watches, and so on. Metal
objects heat up when connected to power and ground and can meltdown,
causing serious burns and/or welding the metal object to the terminals.
Over-temperature
This equipment should not be operated in an area with an ambient
temperature exceed ing the maximum recommended: 55°C (131°F). An airflow
of 200LFM at this maximum ambient temperature is required for HCA cards
and NICs. To guarantee proper airflow, allow at least 8cm (3 inches) of
clearance around the ventila tion openings.
During Lightning - Electrical Hazard
Note
Safety warnings are provided here in the English language. For safety
warnings in other languages, refer to the Adapter Installation Safety
Instructions document available on nvidia.com.
To Next Page
Loading...
