The network ports of the ConnectX®-6 Lx adapter card are compliant with the IEEE 802.3
Ethernet standards listed in Features and Benefits. Ethernet traffic is transmitted through
the SFP28/QSFP28 connectors on the adapter card.
PCI Express Interface
The table below describes the supported PCIe interface in ConnectX®-6 Lx adapter cards.
Supported PCIe Interface Features
PCIe Gen 4.0 (1.1 and 2.0 compatible) through x8
edge connectors
Link Rates: 2.5. 5.0, 8.0 or
16GT/s.
Auto Negotiation to: x16, x8, x4,
x2 or x1.
Support for MSI/MSI-X
mechanisms.
Networking Ports LEDs Interface
There are two I/O LEDs, LED0 and LED1, per port to indicate speed and link status. LED0
is a bicolor (yellow and green) LED and LED1 is a single color (green) LED.
Link Indications
Warning
The adapter card includes special circuits to protect from ESD shocks
to the card/server when plugging copper cables.
To Next Page
Loading...
