Software Requirements
See Operating Systems/Distributions section under the Introduction section.
Software Stacks - NVIDIA OpenFabric software package MLNX_OFED for Linux,
WinOF-2 for Windows, and VMware. See the Driver Installation section.
Safety Precautions
1. Remove any metallic objects from your hands and wrists.
2. Make sure to use only insulated tools.
3. Verify that the system is powered off and is unplugged.
4. It is strongly recommended to use an ESD strap or other antistatic devices.
Pre-Installation Checklist
1. Unpack the ConnectX-6 Lx adapter card.
Unpack and remove the ConnectX-6 Lx card. Check the parts for visible damage that
may have occurred during shipping. Please note that the cards must be placed on
an antistatic surface.
Important
The adapter is being installed in a system that operates with voltages
that can be lethal. Before opening the case of the system, observe
the following precautions to avoid injury and prevent damage to
system components.
Important
To Next Page
Loading...
