5. Care should be taken as not to impede the air exhaust flow through the ventilation
holes. Use cable lengths which allow for routing horizontally around to the side of
the chassis before bending upward or downward in the rack.
6. To remove a cable, disengage the locks and slowly pull the connector away from the
port receptacle. LED indicator will turn off when the cable is unseated.
To uninstall the adapter card, see Uninstalling the Card.
Identifying the Card in Your System
On Linux
Get the device location on the PCI bus by running lspci and locating lines with the string
“NVIDIA Technologies”:
lspci |grep -i Mellanox
Network controller: Mellanox Technologies MT2894 Family [ConnectX-6 Lx]
On Windows
1. Open Device Manager on the server. Click Start => Run, and then enter
devmgmt.msc.
2. Expand System Devices and locate your NVIDIA ConnectX-6 Lx adapter card.
3. Right click the mouse on your adapter's row and select Properties to display the
adapter card properties window.
4. Click the Details tab and select Hardware Ids (Windows 2012/R2/2016) from the
Property pull-down menu.
PCI Device (Example)
To Next Page
Loading...
