HARDWARE INSTALLATION
6 Two GeForce graphic cards (2-way SLI):
a) Install the second GeForce card into the outer most PCI Express
x16 slot on the motherboard.
b) Connect the two cards together using the dual SLI bridge
connector that came with your SLI-ready motherboard.
7 Connect one 6-pin PCI Express auxiliary power connectors coming
from the computer power supply to the connectors on the top edge of
on the top edge of the GeForce GTX 550 Ti graphics card.
If your power supply needs an additional 6-pin power
connector, you can use the included 4-to-6 pin
adapter.Make sure to connect each 4-pin connector
to a separate PSU cable.
SLI
From power supply
To Next Page
Loading...
