8.1 Click the "Detect Displays" button to auto detect the displays you have
installed.
8.2 If you decide to switch the primary display between the displays installed,
click "Device Settings" -> "Select Output Device".
8.3 Click the "Horizontal span" radial button to split your screen horizontally,
placing one half in one display and the other half in the other.
8.4 Click the "Clone" radial button to display an exact copy of your screen in each
of the two displays.
8.5 Click the "Vertical span" radial button to split your screen vertically, placing
the top half in one display and the bottom half in the other.
9. If you select Output Device, Color Correction or Device Adjustment, the
following screens will display respectively. Make any configuration changes that
suit your needs.
To Next Page
Loading...
Need help?
General
