7. After adjusting the options, press the "OK" or the "Cancel" button to save or
cancel your configurations. After returning to the screen of Step 3, click the
"nView" tab. Click "Device Settings" which will display the following options:
Select Output Device, Color Correction, or Screen Adjustment.
I
8. If you installed multiple displays, the "horizontal span" , "clone" and "vertical
span" radio buttons will be selectable. This step configures multiple display
options. If you are not configuring two displays, skip this step.
Note : The nView function can only transmit two video signals to two displays at
the same time. You can see only one of the displays functioning in step 8. The
priority displays are: CRT (DB 15-pin) -> LCD (DVI) -> TV (S or AV).
To Next Page
Loading...
