EasyManuals Logo

Nvidia Geforce RTX 2080 User Manual

Nvidia Geforce RTX 2080
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Hardware Installation
NVIDIA GeForce RTX 2080 User Guide | 8
03
Before You Begin
The GeForce RTX 2080 graphics card is a PCI Express 3.0 ×16 graphics card. Your
computer may already have a graphics card installed in the PCI Express slot. If
so, you will need to remove that graphics card and replace it with the GeForce
RTX 2080 graphics card.
If you do not have a graphics card, this means that your motherboard has on-
board graphics (there is a graphics chip installed on your motherboard or
integrated in the motherboard chipset). If this is the case, there is no action that
needs to be taken before installing your new graphics card.
Use the RTX 2080 graphics card with UL Listed ITE Personal Computer
(PC)/Server.
Installing the GeForce Graphics Card
Because there are so many different computer systems on the market, the
procedure to install the GeForce RTX 2080 graphics card can vary from system to
system. Use the following instructions as a guideline and consult the
documentation for your computer system for any further information on your
individual system.
Note
: It is important that all power to the computer be disconnected before you install
the graphics card.
Discharge your body’s static electricity by touching a grounded surface before
touching the graphics card. A grounded surface is the computer chassis, or some
other surface you know to be grounded.
!
ATTENTION
:
If your system has been running for a while prior to opening the panels, it is
very important that you wait until the graphics card in your system has cooled before
taking the card out of the system. Graphics cards get very hot when they have been
operating for any length of time.
Use the following procedure to install the GeForce RTX 2080 graphics card into
your computer system.
1 Turn off your computer and monitor and disconnect the power cord.
Depending on your computer system, you may need to disconnect the cable
going to the back of your system. Mark the cables so you can make sure you
reconnect them properly.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Nvidia Geforce RTX 2080 and is the answer not in the manual?

Nvidia Geforce RTX 2080 Specifications

General IconGeneral
ArchitectureTuring
CUDA Cores2944
Base Clock1515 MHz
Boost Clock1710 MHz
Memory8 GB GDDR6
Memory Interface256-bit
Memory Bandwidth448 GB/s
TDP215 W
Transistor Count13.6 billion
Manufacturing Process12 nm
GPUTU104
OutputsDisplayPort 1.4, HDMI 2.0b, USB Type-C
Ray Tracing Cores46
Tensor Cores368
NVLinkYes
PCIe InterfacePCIe 3.0 x16
DirectX Support12 Ultimate
OpenGL Support4.6
Maximum Resolution7680 x 4320 @ 60 Hz
Multi Monitor SupportYes
VR ReadyYes
SLI SupportYes (NVLink)

Related product manuals