6.3 How to Change Refresh Rate
1. Make sure that you have installed windows 98/ME Driver. Click on the Start box in the lower left corner and proceed to Setting, Control Panel
2. Inside the Control panel group , click on Display icon to open the Display Properties folder and choose Settings click the Advance Settings
Adapter
3. Click on the Refresh Rate sub window to change refresh rate
4. Select OK and new refresh rate takes effect
5. Refresh Rate default is Optimal.
6. If you change Refresh Rate from Optimal to another, you maybe need to restart Windows System for functional.
Note: If your monitor is not Branded or Plug&Play, you will only see Adapter default and optimal. Please contact your monitor supplier to get right or
compatible drivers for your monitor. Otherwise you can not select the refresh rate you wanted.
7. Manually install Windows 2000 drivers
First time install drivers under windows2000
1. When system boot up, system will prompt find new device. Suppose the device is VGA, now system will find the default drivers for you.
2. If you want to install our drivers along with the GeForce3 Ti200 pack. Please put the drivers CD in your CDROM drive. If now shows SmartInstall
window, please click EXIT button to quit.
3. Drivers for windows2000 are located at \drivers\NVIDIA\7X00\win2000
4. If the drivers is very new may not certified by Microsoft, if so, system will prompt you the drivers do not have “digital signature”
install.
5. Follow on screen instructions will finish the installation.
The following steps describe how to update Windows2000 display drivers
1. Place the Disc (CD Title) into CDROM Drive. If now shows SmartInstall window, please click EXIT button to quit
2. Right click mouse button on Desktop Area, now shows a sub menu window. Please select Properties.
3. Now come up Display Properties window, please select Settings on the top.
4. Select Advanced
5. Select Adapter.
6. Select Change
7. Now comes up a update drivers wizard window. Please follow the on screen instruction.
8. Please specify the drivers location at your CDROM letter: \drivers\NVIDIA\7000\win2000 or the directory where you put your drivers
9. Select Install and click “YES”
when the Installing Driver dialog box appears. If the drivers is very new may not certified by Microsoft, if so, system will
prompt you the drivers do not have “digital signature”, still you can force to install.
A message appears stating that drivers were successfully installed. Click OK. Another message appears stating that the driver could not be restarted
dynamically. Restart Windows2000 to run the new driver. Click OK.
To Next Page
Loading...
Need help?
General
