17
5.4.2.4 nView enable mode
You need two monitors, one analog monitor(CRT) and one TV or DVI (Optional). All
connected well and functional.
Clone mode:
2 monitors show the same picture,
Select Clone and Click Apply to active.
Horizontal span mode:
Picture span horizontally on 2 monitors.
Select Horizontal span, Click Apply to active.
Vertical span mode:
Picture span vertically on 2 monitors
Select Vertical span, Click Apply to
active.
Monitor with blue frame is active. Right click on
it will show the configuration menu. Or you can
click Device Settings>> to set all the functions
like “Standard mode”.
To Next Page
Loading...
