KEY FEATURES
Jetson TX1 Module
> NVIDIA Maxwell GPU with 256 CUDA-cores
> Quad-core ARM
®
Cortex
®
-A57 MPCore Processor
> 4 GB LPDDR4 Memory
> 16GB eMMC 5.1 Flash Storage
> Connects to 802.11ac Wi-Fi and Bluetooth enabled devices
> 10/100/1000BASE-T Ethernet
Buttons
> Power On/Off
> Reset
> Force Recovery
> User-defined
Power Options
> External 19V AC adapter
I/O
> USB 3.0 Type A
> USB 2.0 Micro AB (supports recovery and host mode)
> HDMI
> M.2 Key E
> PCI-E x4
> Gigabit Ethernet
> Full-size SD
> SATA data + power
> GPIOs, I2C, I2S, SPI*
> TTL UART with flow control
> Display expansion header*
> Camera expansion header*
* I/O Expansion headers: refer to product documentation for
header specification.
KIT CONTENTS
> NVIDIA Jetson TX1 Developer Kit carrier board
> AC adapter
> Power Cord
> Rubber feet (4)
> Quick Start Guide
> Safety Booklet
> Antennas to connect to Wi-Fi enabled devices (2)
The following items are recommended, but not included:
> HDMI display and cable (type A)
> Keyboard and Mouse
> JTAG debugger
> TTL to RS232 UART
ADDITIONAL INFORMATION
Recommended Operating Conditions
Ambient Operating Temperature: Min: 0 °C, Max: 50 °C
Following items only included in certain SKUs:
> Jetson Camera Module
> USB Micro-B to USB A cable
> USB Micro-B to Female USB A cable
To Next Page
Loading...
