Nvidia JETSON XAVIER NX User Manual

Jetson Xavier NX Developer Kit DA_09814-001 | 4
Developer kit carrier board: top view
Developer kit carrier board: bottom view
Interface Details
This section highlights some of the Jetson Xavier NX Developer Kit interfaces. See Jetson
Xavier NX Developer Kit Carrier Board Specification for comprehensive information.
Module
• A slot for a microSD card, [J501]. (This slot is on the Jetson Xavier NX module, and
so is not shown in the diagrams of the carrier board.)
• The heatsink supports 15W module power usage at 35 °C ambient temperature.
Depending on your use case, you can configure it to “quiet” (no or slow fan) or
“cool” (higher speed fan). For details, see the section “Fan Mode Control” in the

Nvidia JETSON XAVIER NX Specifications

General

Storage	16 GB eMMC 5.1
AI Performance	21 TOPS (INT8)
Operating Temperature	-25°C to 80°C
Operating System	Linux (JetPack SDK)
GPU	NVIDIA Volta architecture with 384 CUDA cores and 48 Tensor cores
CPU	6-core NVIDIA Carmel ARMv8.2 64-bit CPU 6 MB L2 + 4 MB L3
Memory	8GB 128-bit LPDDR4x
Video Decode	2x 4K60 | 4x 4K30 | 8x 1080p60 | 16x 1080p30 (H.265/H.264)
Camera	Up to 6 cameras
Connectivity	Gigabit Ethernet, M.2 Key E for Wi-Fi/Bluetooth
Power	10 W / 15 W / 20 W
Dimensions	70mm x 45mm