GET STARTED
Here's what you'll need to start using your NVIDIA SHIELD Android TV Game Console, P3430:
1. TV or monitor with HDMI port (HDCP compatible)
2. High-speed HDMI 2.0 cable
3. Internet connection via Wi-Fi or Ethernet
4. A Google account
SET UP NVIDIA SHIELD TV
Here's how to plug in your NVIDIA SHIELD Android TV Game Console and connect your
controller:
1. Connect your SHIELD Android TV Game Console to your TV with a certified HDMI 2.0
cable.
a. Make sure your TV or monitor is off, and plug one end of the HDMI cable into
the HDMI port on the back of your SHIELD Android TV Game Console. Plug the
other end of the cable into an HDMI port on your TV or receiver.
2. Connect your SHIELD Android TV Game Console to power, using the power cord.
a. Plug one end of the power cable into the back of your SHIELD Android TV Game
Console and plug the other end into a power outlet SHIELD Android TV Game
Console will automatically power on as you plug it in and you will see the green
light turn on. When you are not using it, it will automatically go into sleep mode.
3. OPTIONAL: Connect your SHIELD Android TV Game Console to Ethernet. If you do not
use an Ethernet connection, you will have an option during setup to connect to a Wi-Fi
network.
To Next Page
Need help?
General
