Model Number
VSW82V2/
VSW84V2
VSW102V2/
VSW104V2
VSW122V2/
VSW124V2
VSW152V2/
VSW154V2
Recommended
Enclosure Volume
0.65 ft.
3
0.70 ft.
3
1.75 ft.
3
2.75 ft.
3
Tuning Frequency 43 Hz 34 Hz 32 Hz 32 Hz
Ideal Power RMS 250 Watts 350 Watts 450 Watts 600 Watts
F3 39 Hz 29 Hz 31 Hz 35 Hz
Model Number
VSW82V2/
VSW84V2
VSW102V2/
VSW104V2
VSW122V2/
VSW124V2
VSW152V2/
VSW154V2
Recommended
Enclosure Volume
0.35 ft.
3
1.00 ft.
3
1.25 ft.
3
1.75 ft.
3
Ideal Power RMS 400 Watts 500 Watts 600 Watts 750 Watts
F3 64 Hz 45 Hz 55 Hz 39 Hz
FC 70 Hz 51 Hz 51 Hz 47 Hz
QTC 0.780 0.820 0.670 0.890
The enclosure designs listed below will give you the best possible
performance from your VS-Series V2 subwoofer. NVX subwoofers
are optimized for use in both ported and sealed enclosures, each of
which has distinct sonic characteristics.
PORTED BOX
Ported boxes are the enclosure type we recommend for
optimum performance of your VS-Series V2 Subwoofer.
A ported box features a vent or port to couple the woofer’s back-
wave with the front-wave. This results in markedly improved
efciency and low frequency response.
These enclosures are somewhat larger than the sealed alternative.
ENCLOSURES
SEALED BOXES
A sealed enclosure offers improved acoustic suspension and
cone control, which reduces distortion and increases the power
handling capabilities of the subwoofer. They are smaller than
their ported counterparts, and offer atter bass response with
more consistency across the frequency range.
To Next Page
Loading...
