Need help?Do you have a question about the NyMo 200 and is the answer not in the manual?
Displays for photocell, fan, feed auger, ignition coil, and thermostat status.
Step-by-step guide on modifying burner parameters using the control keys.
Explains error codes (PC SHORT, IGN.FAIL) indicated by LED status.
Defines key operational parameters like feed times, pause times, and fan delays.
Lists terminal connections for thermostat, photocell, alarm, phase, and neutral mains.
Identifies locations and types of fuses on the control unit.
Lists terminal connections for ignition coil, fan, feed auger, and additional feed auger.
Details mounting the burner, ensuring airtightness, and positioning the feed auger.
Checks for main fuse, power switch, and voltage on terminals 7 & 8.
Verifies thermostat operation and voltage on terminals 1 & 2.
Checks overheating protector, voltage for feed auger, and hose obstructions.
Inspects ignition fuse and fan connections/obstructions.
Visual representation of electrical connections for the burner and its components.
Outlines the 2-year guarantee period and exclusions for damage.
To Next Page
General