- 16 -
Do not use close to refrigerators, washing machines and metal furniture. Place on a stable surface
and make sure connecting wires are routed to minimize the chance of accidents.
Only use the DC power adaptors supplied, if they must be replaced make sure the replacements
have the same output rating of 5V 2A DC.
Avoid exposing your equipment to harsh conditions such as wet or damp places, high humidity,
strong vibration, extremely high or low temperatures, strong sunlight and places that are very
dusty.
Do not cover or place heavy objects on the units. Make sure there is sucient clearance around the
units to allow adequate ventilation.
Never push objects into holes or ventilation slots.
To save power turn OFF the switches on the power adaptor leads or unplug the power adaptors
from the power sockets when you are not using the equipment.
Don’t continue to use any part of this equipment if you have spilled liquids on it, if it is damaged
in any way or if it does not work normally. Immediately unplug the equipment and get expert
advice.
Cleaning: disconnect the main power supply and use only a lightly dampened cloth. Do not use
chemical solvents or strong detergents as these may damage the cosmetic nish.
• To prevent electric shock, do not remove any cover.
• If anything goes wrong, do not try to repair yourself, get a qualied engineer to look at it.
• Do not expose this equipment to dripping or splashing liquids.
• Never allow a naked ame on or near the equipment.
• This product is not a toy. Do not let young children play with the equipment.
.
SAFETY INFORMATION
To Next Page
Loading...
Need help?
General