Need help?Do you have a question about the NZXT INTERNAL USB HUB and is the answer not in the manual?
Details the four internal USB connectors for device expansion.
Explains the use of magnets for easy mounting onto steel surfaces.
Describes the specific connector for linking the hub to the motherboard.
Identifies the LED for power status indication.
Locates the port for connecting the SATA power cable.
Secures the Internal USB Hub using its embedded magnets onto a steel surface inside the PC case.
Connects the Internal USB Hub to the PC's power supply using the SATA power cable.
Attaches the USB connection cable from the hub to the motherboard's USB 2.0 header.
Plugs USB devices into the remaining internal connectors on the hub.
Steps to resolve issues where the Internal USB Hub's indicator light is not illuminated.
Procedures to confirm if the Internal USB Hub is recognized by the system.
Details the terms and conditions of the NZXT global warranty for products.
Provides contact information and procedures for obtaining NZXT product support and service.
Contains FCC, Canadian ICES, and other compliance statements for the device.
To Next Page
General