M
Michael MurrayJul 27, 2025
What to do if my O-Best D02 are flashing?
- RRuben GonzalezJul 27, 2025
If your O-Best Headsets are flashing, it indicates a low battery. Charge the headset to stop the flashing.
To Next PageTo Next PageWhat to do if my O-Best D02 are flashing?
If your O-Best Headsets are flashing, it indicates a low battery. Charge the headset to stop the flashing.
Why is the sound so small on my O-Best Headsets?
If the sound from your O-Best Headsets is too small, it could be that the headset isn't positioned correctly, or the volume is set too low. Try adjusting the headset's position and increasing the phone volume.
What to do if O-Best Headsets signal is intermittent?
If you are experiencing intermittent signal issues with your O-Best Headsets, it could be due to environmental interference or being too far from your phone. Try moving to a better environment or getting closer to your mobile phone.
Why are my O-Best D02 so noisy?
If your O-Best Headsets are noisy, it might be due to a poor outside environment or being too far away from your phone. Try changing your location or moving closer to your mobile phone.
Why do my O-Best D02 Headsets have an echo?
If you hear an echo on your O-Best Headsets, the volume might be too loud, or the environment could be too noisy. Try adjusting the volume or moving to a quieter environment.
What to do if O-Best D02 Headsets are charging without indication?
If your O-Best Headsets aren't charging and there's no indication, the headset may not be connected well. Adjust the headset's position to ensure a proper connection.
Covers call handling in binaural and single ear modes, answering, rejecting, and redialing.
Instructions for playing music, including play, pause, and skipping tracks using headset controls.
Details on how to turn off the headset, either by placing it in the charging bin or using a long press.
General| Connectivity | Wired |
|---|---|
| Frequency Response | 20Hz-20kHz |
| Microphone | Yes |
| Impedance | 32 ohms |
| Connector | 3.5mm |