Page 2 of 22
Introduction
The Purpose of this document is to outline the installation and operational procedures of the
T4020 \ T5020.
Safety Warnings
To avoid injury please read this manual carefully before installation. Failure to do so could result in injury or
failure of the equipment, this will invalidate any warranties given.
CAUTION
The installation and assembly of this product may only be performed by a skilled electrician.
WARNING
This product contains 240V AC and 24V DC, Isolate power to the unit before removing the cover.
Contact Information
Principle of Operation
Digital Tank Gauge. Accuracy +/- 0.25%.
This gauge is fitted in a weatherproof rated IP65 enclosure, for outdoor use. Fitted with a backlight that
enables easy reading (Backlight turns off after 1 hour). Litres and % Bar are displayed.
M (Master) and up to 3 other trigger points can be displayed.
The gauge can be setup for almost any tank shape, such as Cuboid, Rectangular, Cylindrical, Cylindrical with
dished ends, bespoke based on strapping table. (Level in meters and volume in cubic meters).
Can read temperature as an option, temperature probe required. “TP” probes read 0°C to 70°C.
To Next Page
Loading...
