To Next PageTo Next Page
Need help?Do you have a question about the O.S. engine MAX-15CV-A and is the answer not in the manual?
General| Brand | O.S. engine |
|---|---|
| Model | MAX-15CV-A |
| Category | Engine |
| Language | English |
These cover events which might involve serious (in extreme circumstances, even fatal) injury.
These cover the many other possibilities, generally less obvious sources of danger, but which, under certain circumstances, may also cause damage or injury.
Carefully insert plug, with washer, fingertight only, before final tightening with the correct size plug wrench.
Connect the short length of fuel tubing (supplied) securely between the needle-valve outlet and carburetor inlet.
Guidelines for extending glowplug life and maintaining engine performance through careful use.
Indicators for replacing a glowplug when it no longer delivers optimal performance.
Describes power sources for heating the glowplug, including dry cells and rechargeable cells.
Details the use of leads to conduct current from the battery to the glowplug.
Suggests capacities for fuel tanks based on engine model.
Explains methods for filling the fuel tank.
Recommends using an electric starter for starting the engine.
Recommends fitting a filter to the refuelling container to prevent foreign matter entry.
Specifies the required tubing for connection between the fuel tank and engine.
Describes the use of a plug wrench for tightening the glowplug.
Procedure for setting the needle-valve until the exhaust note begins to change from 4-cycle to 2-cycle.
Procedure for gradually closing the needle-valve for increasing r.p.m. to find the optimum setting.
Describes the clear, high-pitched two-stroke exhaust note indicating optimal setting.
Indicates the setting where revolutions start to decrease, signifying a lean condition.
Specifies the rich needle-valve setting required for initial engine starting.
Lists available O.S. glow plugs by type and code number.
Lists spinner nuts by size, code number, and compatible engine type.
Lists long propeller nut sets by size, code number, and compatible engine type.
Lists silencer extension adaptors by code number, type of engine, and silencer.
Lists silencer exhaust adaptors by code number, type of engine, and silencer.
Lists propeller nut sets for Truturn spinners by code number and engine type.
Lists super silencers by code number, size, and type of engine.
Lists the super filter by code number.
Lists lock washers by code number, size, and type of engine.
Lists the non-bubble weight by code number.
Lists the long socket wrench with plug grip by code number.
