To Next PageTo Next Page
Need help?Do you have a question about the O.S. engine Max-BGX-1 Ring and is the answer not in the manual?
Essential safety advice covering severe injury risks, propeller contact, and fuel hazards.
Important operational advice and general precautions for safe engine use and model setup.
Overview and identification of the fundamental components that make up the engine.
Guidance for installing the engine using structural bearers, emphasizing alignment.
Instructions for mounting the engine to a firewall using the provided backplate.
Steps for connecting and adjusting the throttle linkage for proper control.
Procedure for fitting the exhaust silencer, including notes on sealant use.
Recommendations for positioning the fuel tank for optimal engine performance.
Information on choosing and properly installing glowplugs for reliable engine operation.
Advice on selecting suitable fuels and lubricants, with essential handling safety.
Guidance on choosing the correct propeller size and type for the engine.
Detailed steps for securely attaching the propeller and spinner assembly.
Explanation of the needle valve and carburetor mixture control for engine tuning.
Step-by-step guide for initiating engine startup using an electric starter.
Recommended steps for breaking in the engine to ensure longevity and performance.
First method for finding the optimal needle valve setting for peak engine performance.
Second method for fine-tuning the needle valve setting for best engine response.
Procedure for adjusting the mixture control valve for optimal engine response.
Steps to re-establish the mixture control valve's effective adjustment range.
Simplified starting process after initial setup and break-in.
Guidelines for minor mixture adjustments due to conditions or component changes.
Importance of keeping carburetor orifices clear for consistent engine performance.
Essential steps for post-operation engine care and long-term maintenance.
Detailed exploded diagram and list of engine components with part numbers.
Diagram and list of carburetor parts, including codes for identification.
List of official O.S. brand parts and accessories available for the engine.
Technical drawing with dimensions and key performance specifications of the engine.
Essential safety advice covering severe injury risks, propeller contact, and fuel hazards.
Important operational advice and general precautions for safe engine use and model setup.
Overview and identification of the fundamental components that make up the engine.
Guidance for installing the engine using structural bearers, emphasizing alignment.
Instructions for mounting the engine to a firewall using the provided backplate.
Steps for connecting and adjusting the throttle linkage for proper control.
Procedure for fitting the exhaust silencer, including notes on sealant use.
Recommendations for positioning the fuel tank for optimal engine performance.
Information on choosing and properly installing glowplugs for reliable engine operation.
Advice on selecting suitable fuels and lubricants, with essential handling safety.
Guidance on choosing the correct propeller size and type for the engine.
Detailed steps for securely attaching the propeller and spinner assembly.
Explanation of the needle valve and carburetor mixture control for engine tuning.
Step-by-step guide for initiating engine startup using an electric starter.
Recommended steps for breaking in the engine to ensure longevity and performance.
First method for finding the optimal needle valve setting for peak engine performance.
Second method for fine-tuning the needle valve setting for best engine response.
Procedure for adjusting the mixture control valve for optimal engine response.
Steps to re-establish the mixture control valve's effective adjustment range.
Simplified starting process after initial setup and break-in.
Guidelines for minor mixture adjustments due to conditions or component changes.
Importance of keeping carburetor orifices clear for consistent engine performance.
Essential steps for post-operation engine care and long-term maintenance.
Detailed exploded diagram and list of engine components with part numbers.
Diagram and list of carburetor parts, including codes for identification.
List of official O.S. brand parts and accessories available for the engine.
Technical drawing with dimensions and key performance specifications of the engine.
General| Stroke | 26.0 mm |
|---|---|
| Practical RPM | 2, 000-16, 000 RPM |
| Glow Plug | O.S. #8 |
| Fuel | 10-20% Nitro |
| Muffler | Included |
