O.S. engine MAX-32SX-H Series

To Next Page

It is of vital importance, before attempting to

operate your engine, to read the general

'SAFETY INSTRUCTIONS AND WARNINGS'

section on pages 2-5 of this booklet and to strictly

adhere to the advice contained therein.

•

Also, please study the entire contents of this

instruction manual, so as to familiarize yourself

with the controls and other features of the

engine.

Keep these instructions in a safe place so that

you may readily refer to them whenever

necessary.

It is suggested that any instructions supplied

with the model, radio control equipment, etc.,

are accessible for checking at the same time.

•

Need help?

Do you have a question about the O.S. engine MAX-32SX-H Series and is the answer not in the manual?

Summary

O.S. Engine Safety Instructions and Warnings

General Warnings

Covers events that might involve serious or fatal injury.

General Notes

Basic Engine Parts and Installation Guide

Understanding Glowplugs

Fuel Selection and Handling Guidance

Carburetor Controls and Adjustment Procedures

Carburetor Control Overview

Engine Starting Procedures for Different Models

Starting the 32 SX-H; SX-H Ring

Starting the 32 SX-HX Ring

Engine Running-In and Initial Adjustment

Running-In Procedure

Recommended steps for the initial break-in period of the engine.

Initial Engine Adjustment

Guidelines for setting up the engine's initial operating parameters.

Engine Tuning for Hovering Flight

Optimizing Full Throttle and Mid-Range Performance

Subsequent Engine Mixture Readjustments

Carburetor Cleanliness and Maintenance

Comprehensive Engine Adjustment Chart

Throttle Servo Installation and Linkage

Routine Engine Care and Long-Term Maintenance

Engine Dimensional Drawings and Specifications

MAX-32 SX-HXRING Dimensional Drawings and Specifications