Oase BioStyle 20 User Manual

12
Remove / install heater
You can remove or install the heater to
x Retrofit your filter with a heater,
x Thoroughly clean the filter housing,
x Replace a defective heater.
Prerequisite:
x The pump is removed.
BSE0008
Troubleshooting
Malfunction Possible caus
e
Remed
y
Pump does not start up Insufficient power Check the power supply
cor
d
Impeller unit blocke
d
Cleaning
Insufficient water flow Filter housing or impeller dirty Cleaning
Impeller unit worn out Replace impeller unit
Filter media dirt
y
Replace filter medi
a
Telescopic intake blocked Clean telescopic intake
Telescopic intake and partition wall
not assembled correctl
y
Assemble telescopic intake
and partition wall correctl
y
Filtration insufficient Filter media soiled or worn Replace filter media
Filter housing clogge
d
Clean filter housing
Water heating insufficient
(only "Thermo" version)
Insufficient power for heater miss-
ing
Check the power supply
cord
Heater defectiv
e
Replac
e

Oase BioStyle 20 Specifications

General

Brand	Oase
Model	BioStyle 20
Category	Water Dispenser
Language	English