D
Darlene KingAug 9, 2025
What to do if the temperature is below zero for Oase Nautilus 350 Water Pump?
- Nnicole13Aug 9, 2025
To prevent damage, the Oase Water Pump should be removed when temperatures drop below zero.
To Next PageTo Next PageWhat to do if the temperature is below zero for Oase Nautilus 350 Water Pump?
To prevent damage, the Oase Water Pump should be removed when temperatures drop below zero.
How to troubleshoot Oase Water Pump that does not run?
If your Oase Water Pump isn't running, first check the mains voltage to ensure it's properly connected. If the voltage is fine, the rotor might be blocked. In this case, clean the pump to remove any obstructions.
Why is the fountain height insufficient or inconsistent in my Oase Nautilus 350 Water Pump?
If the fountain height of your Oase Water Pump is insufficient or inconsistent, there are several potential causes. Start by checking if the main flow regulator is closed too far and adjust it accordingly. Also, inspect the nozzle, filter/screen, and hose for any blockages and clean them if necessary. Ensure the hose isn't kinked, and if it is, replace it. If the hose is excessively long, consider reducing its length to minimize friction loss. Lastly, a worn rotor can also cause this issue, so consider replacing it.
What to do if Oase Nautilus 350 Water Pump switches off after a short period of operation?
If your Oase Water Pump switches off after a short period, it might be due to a clogged filter. Clean the filter to resolve this. Another possible cause is that the water temperature is too high. Ensure that the water temperature does not exceed +35°C.
General| Brand | Oase |
|---|---|
| Model | Nautilus 350 |
| Category | Water Pump |
| Language | English |
Instructions for cleaning and maintaining the unit, including rotor checks.
Guidance on storing the unit during frost periods.
Information on proper disposal of the unit.
Table listing common problems, causes, and solutions.
Instructions for safe electrical connection by an authorized expert.
Steps for installing the filter wings and nozzle tube.
Guidance on placing and adjusting the unit in the pond.
How the unit switches on and how to adjust fountain height.
Detailed steps for cleaning and maintaining the pump, especially the rotor.
Specific instructions for replacing the sealing ring in the nozzle tube.
Instructions for storing the unit in a frost-free environment.
Guidance on disposing of the unit according to national regulations.
Table listing common problems, their causes, and remedies.
Describes the specific use of the appliance for pond water.
Warns of risks and warranty cancellation for misuse.
General safety warnings for safe operation and handling.
Details IP rating, depth, and frost precautions.
Instructions not to dispose of with household waste.
