To Next PageTo Next PageHow to troubleshoot Oase Nautilus 80 Water Pump that does not run?
If your Oase Water Pump isn't running, first check the mains voltage to ensure it's properly connected. If the voltage is fine, the rotor might be blocked. In this case, clean the pump to remove any obstructions.
What to do if Oase Nautilus 80 switches off after a short period of operation?
If your Oase Water Pump switches off after a short period, it might be due to a clogged filter. Clean the filter to resolve this. Another possible cause is that the water temperature is too high. Ensure that the water temperature does not exceed +35°C.
What to do if the temperature is below zero for Oase Nautilus 80 Water Pump?
To prevent damage, the Oase Water Pump should be removed when temperatures drop below zero.
Why is the fountain height insufficient or inconsistent in my Oase Water Pump?
If the fountain height of your Oase Water Pump is insufficient or inconsistent, there are several potential causes. Start by checking if the main flow regulator is closed too far and adjust it accordingly. Also, inspect the nozzle, filter/screen, and hose for any blockages and clean them if necessary. Ensure the hose isn't kinked, and if it is, replace it. If the hose is excessively long, consider reducing its length to minimize friction loss. Lastly, a worn rotor can also cause this issue, so consider replacing it.
General| Brand | Oase |
|---|---|
| Model | Nautilus 80 |
| Category | Water Pump |
| Language | English |
Ensures safe electrical connection by authorized experts according to regulations.
Instructions for installing filter wings, nozzle tubes, and positioning the unit.
Steps for starting the pump and adjusting fountain height and shape.
Procedures for cleaning the pump, filter, and replacing the nozzle tube sealing ring.
Guidelines for storing the pump in frost-free conditions and its eco-friendly disposal.
Diagnoses and provides solutions for issues like unit not running or inconsistent fountain performance.
