Oase Neptun 1600 User Manual

Oase Neptun 1600

7 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Neptun

1600, 2600

Warranty, Safety and

Operating Instructions

27852/08B

Other manuals for Oase Neptun 1600

Operating Instructions9 pages

Installation2 pages

Questions and Answers:

N
nperryAug 10, 2025
What to do if my Oase Water Pump unit does not run?
- A
  alexandria76Aug 11, 2025
  If your Oase Water Pump isn't running, several factors could be at play. First, check the mains voltage. If that's not the issue, the rotor might be blocked; try rinsing the vane from the front. Also, inspect the filter housing for soiling and clean it if necessary. Other potential causes include a soiled or worn rotor (clean or replace it), a blocked or kinked hose (clean or replace it, checking for kinks), a clogged filter (clean it), or air in the hose (vent the hoses). Finally, ensure the fountain height is sufficient by setting the regulator.
A
Ashley RodriguezAug 17, 2025
Why does my Oase Water Pump unit switch off after a short period of operation?
- D
  Danielle BrightAug 17, 2025
  The Oase Water Pump might be switching off shortly after starting because the water temperature is too high. Ensure that the water temperature doesn't exceed 95°F (+35°C).
B
barbarajonesAug 22, 2025
Why Oase Neptun 1600 Water Pump unit does not run?
- M
  Mary Carr MDAug 22, 2025
  If your Oase Water Pump isn't running, there could be a couple of reasons. First, check the mains voltage to ensure the pump is getting power. Second, the rotor might be blocked; if so, rinse the vane from the front.
K
Kyle WhiteAug 28, 2025
What to do if Oase Neptun 1600 Water Pump switches off after a short period?
- K
  Kimberly JohnsonAug 28, 2025
  If your Oase Water Pump switches off after running for only a short time, it may be due to the water temperature being too high. Note the maximum water temperature should be +35°C, (85 degrees Fahrenheit).
K
Kelly TranSep 3, 2025
What to do if Oase Water Pump has insufficient fountain height?
- A
  alexis49Sep 3, 2025
  If your Oase Water Pump isn't achieving the expected fountain height, several factors could be responsible: * The regulator might be closed too far; try adjusting it. * The filter housing could be soiled, requiring cleaning. * There may be air in the hose, which needs to be vented. * The rotor might be dirty and need cleaning, or it could be worn and need replacement. * The hose might be blocked, kinked or defective, requiring cleaning, unkinking, or replacement. * The filter might be clogged and needs cleaning.

Oase Neptun 1600 Specifications

General

Brand	Oase
Model	Neptun 1600
Category	Water Pump
Language	English

Related product manuals

Oase Neptun 3000

Oase Neptun 6000

Preview: Oase Neptun 2600

Oase Neptun 2600

Preview: Oase Neptun Series

Oase Neptun Series

Preview: Oase Nautilus 50

Oase Nautilus 50

Oase Nautilus 80

Oase Nautilus 250

Oase Nautilus 200

Oase Nautilus 110

Oase Nautilus 350

Oase Nautilus 450

Preview: Oase Pondovac